Fixed-mounted front hitch SHL F

Optimally adapted to the respective tractor type and nicely adjusted to the tractor design!

Technical data:

(for the details see type catalogue)

Type Lift capacity Arm category width For tractors
SHL F4 4 kN (400 kg) Cat.0 (Cat.1) to 20 hp
SHL F6 6 kN (600 kg) Cat.1 (Cat.0) to 30 hp
SHL F8 8 kN (800 kg) Cat.1 (Cat.0) to 60 hp
SHL FM8 8 kN (800 kg) Cat.1 (Cat.0) to 60 hp
SHL F10 10 kN (1000 kg) Cat.1 to 60 hp
SHL F17 17 kN (1700 kg) Cat.2 (Cat.1) to 70 hp
SHL F25 25 kN (2500 kg) Cat.2 to 110 hp
SHL F35 35 kN (3500 kg) Cat.2 to 150 hp
SHL F43 43 kN (4300 kg) Cat.2 to 230 hp

Quick contact!

Name (required)

E-mail (required)

Tel. Number (required)

Address, Company name etc.: (required)

By using this form you agree that form can create and send email message to sales department LEŠNIK LENART d.o.o. You agree that we can get back in touch with you. We do not send or share the data with any 3rd-parties.
Privacy Policy

Standard equipment:

  • Fixed- mounted version
  • Front hitch is optimally adapted to each tractor type and nicely adjusted to the tractor design
  • Modern design
  • lateral brackets are mounted to the front axle
  • Walterscheid quick hitch weld on hooks Cat. 2
  • a robust structural design
  • top quality – only the highest quality components are installed
  • foldable and removable lift arms (transport position)
  • bilaterally fastened suspended lift arms, which can be fixed – floating or fixed position
  • double-actinghydraulic cylinders
  • hardened ball joints on both cylinders
  • all bearings and pivot points can be lubricated
  • drawbar eye
  • holder for top link (central lever)
  • hydraulic hoses with quick couplings and a shut-off valve in the lifting pipe
  • Front hitch is painted dark grey (RAL 7021) or on customer request
  • fasteners

Additional Equipment:

  1. Walterscheid quick hitch weld on hooks Cat.1 or Cat.3L
  2. lateral mounting brackets extended to the gearbox housing-bell or tractor cab
  3. two additional flexible high-pressure hydraulic hoses with quick couplings installed on the cross-bracket
  4. ” T-joint” for the  rear quick coupling of the tractor
  5. reinforcing tensioning-pressurizing link under the tractor chassis for heavy-duty operations
  6. hydraulic accumulator (oscillation damper) – protects the tractor with a heavy-duty attachment from shocks (oscillations) due to uneven roads
  7. counter spring holder (for front rotary mower)
  8. 7-pin socket (12V)
  9. quick release mounting plate (utility plate) EURO Gr. 3 (DIN 76060 A, B)
  10. top link (central lever) Cat. 1 or Cat. 2
  11. triangular headstock Cat.0, Cat.1 or Cat.2
  12. additional hydraulic control valves for the tractor

SHL FM8

– FIXED mounted Front hitch for small tractors from 30-60 hp
– mounted to the front axle
– lifting force 800 kg (8 kN)
– robust structural design
– lateral consoles, fastened into front bridge
– foldable (transport position) and removable lift arms
– both-sided oscillating fastened lift arms, which can be fixed-swing compensation position and fixed position
– width category Cat.1 or Cat.0
– two-way hidraulic operation
– tempered bearing joint balls on both cilinders
– Walterscheid lower link hooks – quick coupler Cat.1
– integrated tow bar clevis
– hydraulic lines with quick clamps and closing valve in lift hoses
– Front hitch ispainted in dark grey colour (RAL 7021)
– screw materials (for self-assembly to a tractor)
-weight: 105 kg

List of tractors on which SHL FM8 can be mounted

Same Solaris 35-45-55
Hürlimann Prince 35-45-55
Deutz Fahr Agrokid 210-220-230
Lamborghini R1.35-R1.45-R1.55
Lamborghini EGO 35-45-55

LEŠNIK LENART, d.o.o.
Zgornji Žerjavci 33a
2230 Lenart v Slovenskih goricah
SLOVENIA

Tel.: 00386 2 729 24 03
Mobile: 00386 41 300 035
Fax: 00386 2 729 24 04
E-mail: info@lesnik-slo.com

Copyright © 2016 LESNIK LENART | Content and editing: LEŠNIK LENART

Our website does not use cookies until further notice! Read our privacy policy.

 

Pin It on Pinterest

Share This
DIVI licence affil.