DETACHABLE front hydraulic systems SHL H

Optimally adapted to the respective tractor type and nicely adjusted to the tractor design!

front hydraulic systems

Front hydraulic linkage mounting (detachable)

front hydraulic systems

Snow plow utility plate mounting.

Technical data:

Type Lift capacity Arm category width For tractors
SHL H17 17 kN (1700 kg)" Cat.2 (Cat.1) to 70 hp
SHL H25 25 kN (2400 kg) Cat.2 to 110 hp
SHL H35 35 kN (3500 kg) Cat.2 to 150 hp
SHL H43 43 kN (4300 kg) Cat.2 to 230 hp

Quick contact!

Name (required)

E-mail (required)

Tel. Number (required)

Address, Company name etc.: (required)

By using this form you agree that form can create and send email message to sales department LEŠNIK LENART d.o.o. You agree that we can get back in touch with you. We do not send or share the data with any 3rd-parties.
Privacy Policy

Standard equipment:

  • Front hydraulic systemsDETACHABLE version
  • for alternating operation with other tractors
  • Front hydraulic systems are optimally adapted to each tractor type and nicely adjusted to the tractor design
  • modern design
  • a robust structural design
  • top quality – only the highest quality components installed
  • lateral brackets are mounted to the front axle
  • foldable and removable lift arms (transport position)
  • bilaterally fastened suspended lift arms, which can be fixed – floating or fixed position
  • double-acting hydraulic cylinders
  • hardened ball joints on both cylinders
  • all bearings and pivot points can be lubricated
  • Walterscheid quick hitch weld on hooks Cat. 2
  • drawbar eye
  • holder for top link (central lever)
  • hydraulic hoses with quick couplings and a shut-off valve in the lifting pipe
  • Paint RAL 7021 (dark grey) or on customer request
  • fasteners

Additional Equipment:

  1. Walterscheid quick hitch weld on hooks Cat.1 or Cat.3L
  2. lateral mounting brackets extended to the gearbox housing-bell or tractor cab
  3. two additional flexible high-pressure hydraulic hoses with quick couplings installed on the cross-bracket
  4. ” T-joint” for the  rear quick coupling of the tractor
  5. reinforcing tensioning-pressurizing link under the tractor chassis for heavy-duty operations
  6. hydraulic accumulator (oscillation damper) – protects the tractor with a heavy-duty attachment from shocks (oscillations) due to uneven roads
  7. counter spring holder (for front rotary mower)
  8. 7-pin socket (12V)
  9. quick release mounting plate (utility plate) EURO Gr. 3 (DIN 76060 A, B)
  10. top link (central lever) Cat. 1 or Cat. 2
  11. triangular headstock Cat.0, Cat.1 or Cat.2
  12. additional hydraulic control valves for the tractor

Zgornji Žerjavci 33a
2230 Lenart v Slovenskih goricah

Tel.: 00386 2 729 24 03
Mobile: 00386 41 300 035
Fax: 00386 2 729 24 04

Copyright © 2016 LESNIK LENART | Content and editing: LEŠNIK LENART

Our website does not use cookies until further notice! Read our privacy policy.


Pin It on Pinterest

Share This
DIVI licence affil.